Return-path: Received: from s131.mittwaldmedien.de ([62.216.178.31]:16457 "EHLO s131.mittwaldmedien.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754922AbXERGqq (ORCPT ); Fri, 18 May 2007 02:46:46 -0400 Received: from lin01.mn-solutions.de (pD95F9490.dip0.t-ipconnect.de [217.95.148.144]) by s131.mittwaldmedien.de (Postfix) with ESMTP id E61415E45D5 for ; Fri, 18 May 2007 08:18:36 +0200 (CEST) Received: from mnz66.mn-solutions.de.mn-solutions.de (mnz66.mn-logistik.de [192.168.233.66]) by lin01.mn-solutions.de (Postfix) with ESMTP id F00961E002B for ; Fri, 18 May 2007 08:18:31 +0200 (CEST) From: Holger Schurig To: linux-wireless@vger.kernel.org Subject: Re: Hermes II driver Date: Fri, 18 May 2007 08:18:28 +0200 References: <464B72F3.5090709@passys.nl> In-Reply-To: <464B72F3.5090709@passys.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Message-Id: <200705180818.29081.hs4233@mail.mn-solutions.de> Sender: linux-wireless-owner@vger.kernel.org List-ID: > to the device on initialization. The orinoco driver does not > do that. There was a working driver source on the Agere site, > but that is for 2.4 kernels only. I found a 2.6 patch for that > source, but it's HermesI only. The Speedtouch 110 is HermesII. I once wrote a patch to convert an older Hermes I/II driver to Kernel 2.6.15. It also did this only for an older version of the driver, 7.18 but not 7.22. Is the patch you found for a newer kernel/Agere driver version?