From: Matthias Dahl Subject: Re: =?iso-8859-1?q?snd-hda-intel=2C_=09AD_1988b=3A_SPDIF?= =?iso-8859-1?q?_output_not_working_correctly=2C_=09volume_low_for_?= =?iso-8859-1?q?analog_output?= Date: Tue, 17 Jul 2007 18:22:56 +0200 Message-ID: <200707171822.58228.ml_alsa@mortal-soul.de> References: <200707170832.01976.ml_alsa@mortal-soul.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from dd15922.kasserver.com (dd15922.kasserver.com [85.13.137.18]) by alsa0.perex.cz (Postfix) with ESMTP id 76C401038C1 for ; Tue, 17 Jul 2007 18:22:57 +0200 (CEST) In-Reply-To: Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On Tuesday 17 July 2007 12:21:25 Takashi Iwai wrote: > Which applications are you using? Tested with amarok, kaffeine (and thus xine), mplayer, alsaplayer... > For further analysis, first get /proc/asound/card0/codec#* files for > both working and non-working states. This includes most of codec > register information, so we can compare the details. In addition, run > "alsactl -f somefile store" in both cases, too. This file contains > the mixer status. Okay... it's hard to force it, so next time something like that happens, I will get the informations you asked for. (I already attached several infos to my last mail) Is there something else I can do or provide you with in the meantime...? > Also, check the kernel messages when it hangs. If it's related to the > controller communication error, it must show some timeout messages. There are no kernel msgs... already checked that. > No, it's almost same (if we rely on the datasheet). Different revision maybe...? > Did you try any model module option? It might be a BIOS problem that > doesn't set up the codec informatoin correctly. With model option, we > can override and use the preset configuration. Yeah... tried several things so far. 1] model option With the auto setting, I can raise the volume a lot louder. Unfortunately every sound I play back through spdif (non-ac3) seems overamplified even if I lower the iec958 volume below -45db. I cannot get that right. Also in order to correctly set the front volume, I have to adjust the headphone volume as well. If I don't, the front sounds dull somehow. Also tried other variants but usually one of the speakers isn't working or stuff like that. Currently I am using 6stack-dig with the problems outlined in my earlier mail. Unfortunately neither with the auto setting, nor with 6stack-dig, I am able to switch the output mode (6 channel, 2 channel, ...). It's always 6 channels and whatever I play back is routed to every speaker. :-( 2] position_fix I don't seem to have any luck with that one. Doesn't solve any problems... with setting at 3, things are even worse with more distortions. So... I could live with the occasional spdif hang but is there something I can do about those distortions I hear with spdif and non-ac3 stuff played back? I can even hear it when nothing is being played back. Interestingly, the distortions are gone when ever I have played back something ac3 (passthrough) until I play back something non-ac3. Thanks again, matthew.