From: Wolfgang Denk Date: Wed, 26 Sep 2007 16:30:21 +0200 Subject: [U-Boot-Users] Looking for Help booting Kernel In-Reply-To: Your message of "Wed, 26 Sep 2007 10:16:03 EDT." <46FA69A3.70701@cadlink.com> Message-ID: <20070926143021.8529F24769@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <46FA69A3.70701@cadlink.com> you wrote: > > Is there anything special I need to pass to the kernel for setting up > the console on the MPC5200B? I had to change ttyS0 to ttyPSC0 for the > old console to work. Is there anything I need to enable inside the kernel? What are you talking about - is this an arch/ppc or an arch/powerpc configuration? If you use an arch/powerpc configuration, you have to pass a device tree to Linux, too. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The universe is all a spin-off of the Big Bang.