From: Wolfgang Denk <wd@denx.de>
Date: Fri, 28 Sep 2007 22:28:04 +0200
Subject: [U-Boot-Users] [PATCH] tsec.c patch for receiver reset
In-Reply-To: Your message of "Fri, 28 Sep 2007 10:24:17 PDT."
	<46FD38C1.3000205@fulcrummicro.com>
Message-ID: <20070928202804.BAEA624769@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <46FD38C1.3000205@fulcrummicro.com> you wrote:
> When we upgraded from u-boot 1.1.6 to 1.2.0, we found that ethernet no 
> longer worked reliably on our 8541-based platforms, although for some 
> reason 8548-based systems seemed to work fine.  The problem was traced 
> to a missing assignment in function startup_tsec.  We have tried this 
> patch on all of our 8541 and 8548-based boards, and it has resolved the 
> problem for us.
> 
> Any comments or suggestions are greatly appreciated.
> 
> Signed-off by: Alain Gravel <agravel@fulcrummicro.com>
> Signed-off by: Dan Wilson <dwilson@fulcrummicro.com>
> ====================================================
> --- u-boot.git/drivers/tsec.c
> +++ fulcrum/drivers/tsec.c
> @@ -803,6 +803,7 @@
>        /* Tell the DMA it is clear to go */
>        regs->dmactrl |= DMACTRL_INIT_SETTINGS;
>        regs->tstat = TSTAT_CLEAR_THALT;
> +       regs->rstat = RSTAT_CLEAR_RHALT;
>        regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
> }

Please indent by TABs, not spaces...

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
They say a little knowledge is a dangerous thing,  but it is not  one
half so bad as a lot of ignorance.   - Terry Pratchett, _Equal Rites_