From: Alan Cox Subject: Re: "Fix ATAPI transfer lengths" causes CD writing regression Date: Wed, 31 Oct 2007 11:49:58 +0000 Message-ID: <20071031114958.210bd7cc@the-village.bc.nu> References: <47274A5F.6070409@gentoo.org> <20071030153417.59b9182c@the-village.bc.nu> <47276DCA.1000808@gentoo.org> <20071030190153.373c9347@the-village.bc.nu> <47278439.4030801@gentoo.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from [81.2.110.250] ([81.2.110.250]:35166 "EHLO the-village.bc.nu" rhost-flags-FAIL-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1753481AbXJaLsf (ORCPT ); Wed, 31 Oct 2007 07:48:35 -0400 In-Reply-To: <47278439.4030801@gentoo.org> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Daniel Drake Cc: linux list , linux-ide@vger.kernel.org On Tue, 30 Oct 2007 19:21:29 +0000 Daniel Drake wrote: > Alan Cox wrote: > > I would guess Brasero is issuing a command with the length of data > > wrongly set. In the old code that might well just produce errors of the > > "Umm wtf is this data left over for ?", with the new code the drive is > > likely to change state as it knows the transfer size and that will > > *correctly* cause an HSM error and what follows. > > > > Now the question is who gets the length wrong - Brasero or the ata > > translation code in libata > > Brasero does exactly the same as my test app which I attached to my last > mail. Is my test app wrong? Would need to double check the SCSI specificatons to be sure but I think you are asking for less data than the drive wishes to provide. You aren't allowed to do that with ATA. Alan