Return-Path: Received: from mail-out.m-online.net (mail-out.m-online.net [212.18.0.9]) by ozlabs.org (Postfix) with ESMTP id C7D26DDDD5 for ; Sun, 18 Nov 2007 11:54:07 +1100 (EST) To: "Jon Smirl" From: Wolfgang Denk Subject: Re: Hardware debuggers for PPC74xx G4 CPUs Mime-version: 1.0 Content-type: text/plain; charset=ISO-8859-1 In-reply-to: Your message of "Wed, 14 Nov 2007 21:34:45 EST." <9e4733910711141834n2bfb1742v5637c56e27e26f5a@mail.gmail.com> Date: Sun, 18 Nov 2007 01:47:29 +0100 Sender: wd@denx.de Message-Id: <20071118004729.67824247F1@gemini.denx.de> Cc: Olof Johansson , linuxppc-dev@ozlabs.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , In message <9e4733910711141834n2bfb1742v5637c56e27e26f5a@mail.gmail.com> you wrote: > > > * The documentation is only available under NDA, a problem for open > > source debuggers. > > This is what we need. I would like it specifically for the mpc5200. > But we want to use it in OpenOCD so NDA won't work. It doesn't work. Been there a logn time ago. It's and endless fingerpointing. Freescale (by then: Motorola) says they cannot release any information because of their contracts with IBM, and vice versa. > Dominic is way experienced implementing JTAG for ARM CPUs. He has done > several dozen interfaces. ARM doesn't have any problems releasing > their debugging info. JTAG is simple, but you don't get the necessery information for the COP (= debug) interface. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Genius doesn't work on an assembly line basis. You can't simply say, "Today I will be brilliant." -- Kirk, "The Ultimate Computer", stardate 4731.3