Return-path: Received: from s131.mittwaldmedien.de ([62.216.178.31]:28562 "EHLO s131.mittwaldmedien.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752155AbXKSJIO (ORCPT ); Mon, 19 Nov 2007 04:08:14 -0500 From: Holger Schurig To: linux-wireless@vger.kernel.org Subject: Re: [BUG] libertas: probing for Marvell USB8388 fails Date: Mon, 19 Nov 2007 10:08:26 +0100 Cc: Stefano Brivio References: <20071117023548.79a7a33c@morte> In-Reply-To: <20071117023548.79a7a33c@morte> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Message-Id: <200711191008.26174.hs4233@mail.mn-solutions.de> (sfid-20071119_090818_249992_3C4C2554) Sender: linux-wireless-owner@vger.kernel.org List-ID: > Marvell USB8388, running on wireless-2.6. Firmware is: > 421964206b0699014a11256ac48dd0a8 /lib/firmware/usb8388.bin lsusb says "Bus 001 Device 003: ID 1286:2001". And when I insert the card, I see usb 1-1: new high speed USB device using ehci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice When I modprobes usb8xxx.ko (I have it in my module blacklist), I get an additional two lines: libertas: eth1: Marvell WLAN 802.11 adapter usbcore: registered new interface driver usb8xxx After this, the USB stick works. I use this firmware: $ md5sum /lib/firmware/usb8388.bin f1dfa0042efd61dc138b01fdf8c0cdab /lib/firmware/usb8388.bin As I got this firmware some months ago (and I hardly use this device), I cannot say which download link I've used.