From: Niklaus Giger <niklausgiger@gmx.ch>
Date: Wed, 5 Dec 2007 08:16:56 +0100
Subject: [U-Boot-Users] PPC440EPx: Make Sequoia boot vxWorks
Message-ID: <200712050816.56746.niklausgiger@gmx.ch>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

vxWorks expects in 
TLB 0 a entry for the Machine Check interrupt
TLB 1 a entry for the RAM
TLB 2 a entry for the EBC
TLB 3 a entry for the boot flash
Therefore I reordered the TLB entries correspondingly and did set the
CFG_TLB_FOR_BOOT_FLASH ?to 3 (see my previous patch about minimal
support for vxWorks)

After changing the baudrate to 9600 I had no problems to boot the
vxWorks image as distributed by WindRiver (Revision 2.0/1 from 
June 18, 2007)

Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
---
 Hi Stefan

I have no problems about nitpicking, as it helps me to learn how to work
efficiently with you maintainers. I really appreciate your work. Therefore
I hope I got at least this third attempt right.

?board/amcc/sequoia/init.S | ? 20 ++++++++++----------
?include/configs/sequoia.h | ? ?1 +
?2 files changed, 11 insertions(+), 10 deletions(-)

diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
index 5fe3af9..21ee9f5 100644
--- a/board/amcc/sequoia/init.S
+++ b/board/amcc/sequoia/init.S
@@ -87,19 +87,22 @@
?tlbtab:
????????tlbtab_start
?
-???????/*
-??????? * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-??????? * speed up boot process. It is patched after relocation to enable SA_I
-??????? */
+???????/* vxWorks needs this as first entry for the Machine Check interrupt */
+???????tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+???????/* TLB-entry for DDR SDRAM (Up to 2GB) */
+???????tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+???????/* TLB-entry for EBC */
+???????tlbentry( CFG_BCSR_BASE, SZ_256M, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+???????/* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the */
?#ifndef CONFIG_NAND_SPL
????????tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
?#else
????????tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
?#endif
?
-???????/* TLB-entry for DDR SDRAM (Up to 2GB) */
-???????tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-
?#ifdef CFG_INIT_RAM_DCACHE
????????/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
????????tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
@@ -111,9 +114,6 @@ tlbtab:
????????tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
????????tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
?
-???????/* TLB-entry for EBC */
-???????tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
-
????????/* TLB-entry for NAND */
????????tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
?
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 600f98c..6a972e4 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -53,6 +53,7 @@
?#define CFG_MONITOR_LEN????????????????(384 * 1024)????/* Reserve 384 kB for Monitor???*/
?#define CFG_MALLOC_LEN?????????(256 * 1024)????/* Reserve 256 kB for malloc()??*/
?
+#define CFG_TLB_FOR_BOOT_FLASH ?3
?#define CFG_BOOT_BASE_ADDR?????0xf0000000
?#define CFG_SDRAM_BASE?????????0x00000000??????/* _must_ be 0??????????*/
?#define CFG_FLASH_BASE?????????0xfc000000??????/* start of FLASH???????*/
-- 
1.5.2