From: Robert Schwebel Subject: Re: High latencies on MPC5200 with patch-2.6.24-rc5-rt1 Date: Tue, 8 Jan 2008 21:40:39 +0100 Message-ID: <20080108204039.GF3177@pengutronix.de> References: <47834CB7.1030102@grandegger.com> <20080108154947.GB3177@pengutronix.de> <4783A7A6.6030808@grandegger.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Cc: linux-rt-users@vger.kernel.org To: Wolfgang Grandegger Return-path: Received: from metis.extern.pengutronix.de ([83.236.181.26]:36205 "EHLO metis.extern.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751844AbYAHUkm (ORCPT ); Tue, 8 Jan 2008 15:40:42 -0500 Content-Disposition: inline In-Reply-To: <4783A7A6.6030808@grandegger.com> Sender: linux-rt-users-owner@vger.kernel.org List-ID: On Tue, Jan 08, 2008 at 05:41:10PM +0100, Wolfgang Grandegger wrote: > You are obviously using a 2.6.23.1 with private patches for MPC5200 as > there is no FEC driver or no clock event support in that version. Oops, sure, I should have noted. The patches are part of the -6 release of the BSP: http://www.pengutronix.de/oselas/bsp/phytec/download/phyCORE-MPC5200B-tiny/ > The _official_ 2.6.24-rc5 finally builds fine and works for my > Icecube-Eval-Board :-). Yes, it would make sense to add board support > for the phyCORE-MPC5200B-tiny for that version. Sure, we'll do soon. > > Can you elaborate which load you are using? > > "while ls; do ls; done" in a telnet window, "ping -f " and the > cache calibrator. We need some well defined default loads for this kind of machines. I'll post a proposal when we've collected our current ideas. > Some time in the past I also measured much better values and likely > there is a problem with the official version. Yup. We are in the process of setting up an autobuilder for the phyCORE-MPC5200B. It will hopefully soon find latency regressions in a more systematic way. Robert -- Robert Schwebel | http://www.pengutronix.de OSADL Testlab @ Pengutronix | http://www.osadl.org