From: Wolfram Sang Subject: [PATCHv2 0/3] PCA9564 platform driver Date: Wed, 06 Feb 2008 21:20:56 +0100 Message-ID: <20080206202056.364404622@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org Hello, this is my second try of a patch series adding a platform driver for the PCA9564. I included most suggestions from last time; if not, I tried to make clear why. One point I should mention again is that I did not use NO_IRQ as I read on lkml, that 0 is the equivalent for NO_IRQ and everything else is more like an unwanted exception. I built this driver on x86 and blackfin. The actual testing was done using the latter. All the best, Wolfram -- Dipl.-Ing. Wolfram Sang | http://www.pengutronix.de Pengutronix - Linux Solutions for Science and Industry _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c