From: Jean Delvare Date: Mon, 18 Feb 2008 18:55:46 +0000 Subject: Re: [lm-sensors] [PATCH] Add driver for AD7414 i2c temperature Message-Id: <20080218195546.35cfe61c@hyperion.delvare> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Mon, 18 Feb 2008 13:15:14 -0500, Sean MacLennan wrote: > Jean Delvare wrote: > > Frank's driver is a "new-style" i2c driver. These drivers do not probe > > the i2c adapters for supported chips automatically. Instead, platform > > code should explicitly instantiate the I2C devices that are present on > > the system. In the case of embedded designs, this is typically done by > > calling i2c_register_board_info() in platform code. > > That works, thanks! So the patch works for me. Great, thanks for testing. Would you also feel like reviewing the code? -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors