From: "Zhai, Edwin" Subject: stubdom questions Date: Tue, 19 Feb 2008 19:39:41 +0800 Message-ID: <20080219113941.GF21201@edwin-srv.sh.intel.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="CD/aTaZybdUisKIc" Return-path: Content-Disposition: inline List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: samuel.thibault@eu.citrix.com, Keir Cc: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org --CD/aTaZybdUisKIc Content-Type: text/plain; charset=us-ascii Content-Disposition: inline samuel, I have a try with HVM stubdomain on r17062, but failed to make on 32b platform. Attached patch can fix it, but don't know if okay. After installation, I failed to start stubdom. So I created it manually and got following debug mesg(both HVMdomain and stubdom are created) Can you give some lights on following questions: 1. I use default vnclisten. Does it matter? 2. Seems qemu in stubdom has some issue and couldn't update the 'vnc-port' in xenstore. Or the stubdom didn't run at all. How can I debug it? 3. "Create /etc/xen/stubdom-hvmconfig" in readme -- seems "hvmconfig" should match the domain name rather than config file. Thanks, =================== running error ============================= # xm list Name ID Mem VCPUs State Time(s) Domain-0 0 1813 2 r----- 2489.0 EdwinHVMDomainVtd2 44 128 1 ------ 0.0 stubdom-EdwinHVMDomainVtd2 45 32 1 -b---- 0.0 [root@vt-gang32 ~]# /usr/lib/xen/bin/stubdom-dm -d 44 -domain-name EdwinHVMDomai nVtd2 -m 128 -vnc 127.0.0.1:0 -vncunused -monitor vc -vcpus 1 -boot c -serial pt y -acpi -M xenfv xenstore-read: couldn't read path /local/domain/44/console/vnc-port Using config file "./stubdom-EdwinHVMDomainVtd2". Started domain stubdom-EdwinHVMDomainVtd2 xenstore-read: couldn't read path /local/domain/44/console/vnc-port Failed to read /local/domain/0/backend/vbd/45/768/feature-flush-cache. 16777216 sectors of 512 bytes ************************** blk_open(/local/domain/45/device/vbd/768) -> 5 xs_read(/local/domain/45/device/vbd/5632/phantom_vbd): ENOENT xs_watch(/local/domain/0/backend/vbd/45/5632/params, hdc) ******************* BLKFRONT for /local/domain/45/device/vbd/5632 ********** backend at /local/domain/0/backend/vbd/45/5632 xenstore-read: couldn't read path /local/domain/44/console/vnc-port xenstore-read: couldn't read path /local/domain/44/console/vnc-port xenstore-read: couldn't read path /local/domain/44/console/vnc-port ==================================================================== ================== compile error =================================== make[2]: Entering directory `/home/another/gzhai/srcs/hg/xen-dev/hv/extras/mini-os/arch/x86' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/home/another/gzhai/srcs/hg/xen-dev/hv/extras/mini-os/arch/x86' i686-xen-elf-ld -r -m elf_i386 arch/x86/x86_32.o blkfront.o events.o fs-front.o gnttab.o hypervisor.o kernel.o main.o mm.o netfront.o sched.o lib/ctype.o lib/math.o lib/printf.o lib/string.o lib/sys.o lib/xmalloc.o lib/xs.o xenbus/xenbus.o console/console.o console/xencons_ring.o lwip.a /home/another/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/i386-dm-stubdom/qemu.a /home/another/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/i386-dm-stubdom/libqemu.a -Larch/x86 -lx86_32 -L../../stubdom/libxc -lxenctrl -lxenguest -lpci -lz -lc -o mini-os.o i686-xen-elf-objcopy -w -G xenos_* -G _start mini-os.o mini-os.o i686-xen-elf-ld -m elf_i386 -T arch/x86/minios-x86_32.lds mini-os.o -o mini-os mini-os.o: In function `bdrv_snapshot_dump': /home/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/block.c:1042: undefined reference to `__moddi3' /home/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/block.c:1042: undefined reference to `__moddi3' mini-os.o: In function `vmdk_is_allocated': /home/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/block-vmdk.c:547: undefined reference to `__moddi3' mini-os.o: In function `vmdk_read': /home/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/block-vmdk.c:563: undefined reference to `__moddi3' mini-os.o: In function `cloop_read': /home/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/block-cloop.c:143: undefined reference to `__moddi3' mini-os.o:/home/gzhai/srcs/hg/xen-dev/hv/stubdom/ioemu/block-bochs.c:182: more undefined references to `__moddi3' follow make[1]: *** [mini-os] Error 1 make[1]: Leaving directory `/home/another/gzhai/srcs/hg/xen-dev/hv/extras/mini-os' make: *** [qemu-stubdom] Error 2 =================================================================== -- best rgds, edwin --CD/aTaZybdUisKIc Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="stubdom_fix.patch" diff -r bdc4d718bef7 extras/mini-os/lib/math.c --- a/extras/mini-os/lib/math.c Tue Feb 19 16:19:51 2008 +0800 +++ b/extras/mini-os/lib/math.c Tue Feb 19 17:00:34 2008 +0800 @@ -388,6 +388,23 @@ __umoddi3(u_quad_t a, u_quad_t b) return (r); } +/* + * Remainder of signed quad division. + * Truncates towards zero, as required by C99: + * 11 % 5 = 1 + * -11 % 5 = -1 + * 11 % -5 = 1 + * -11 % -5 = 1 + */ +s64 __moddi3(s64 a, s64 b) +{ + u64 ua, ub, urem; + int neg = (a < 0); + ua = neg ? -(u64)a : a; + ub = (b < 0) ? -(u64)b : b; + __qdivrem(ua, ub, &urem); + return (neg ? -urem : urem); +} #endif /* !defined(__ia64__) */ #ifndef HAVE_LIBC --CD/aTaZybdUisKIc Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=xmexamplestub # Python configuration setup for 'xm create'. # This script sets the parameters used when a domain is created using 'xm create'. # You use a separate script for each domain you want to create, or # you can set the parameters for the domain on the xm command line. #============================================================================ import os, re arch = os.uname()[4] if re.search('64', arch): arch_libdir = 'lib64' else: arch_libdir = 'lib' #---------------------------------------------------------------------------- # Kernel image file. kernel = "/usr/lib/xen/boot/hvmloader" # The domain build function. HVM domain uses 'hvm'. builder='hvm' # Initial memory allocation (in megabytes) for the new domain. # # WARNING: Creating a domain with insufficient memory may cause out of # memory errors. The domain needs enough memory to boot kernel # and modules. Allocating less than 32MBs is not recommended. memory = 128 # Shadow pagetable memory for the domain, in MB. # If not explicictly set, xend will pick an appropriate value. # Should be at least 2KB per MB of domain memory, plus a few MB per vcpu. # shadow_memory = 8 # A name for your domain. All domains must have different names. name = "EdwinHVMDomainVtd2" # 128-bit UUID for the domain. The default behavior is to generate a new UUID # on each call to 'xm create'. #uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9" #----------------------------------------------------------------------------- # The number of cpus guest platform has, default=1 #vcpus=2 # Enable/disable HVM guest PAE, default=1 (enabled) pae=1 # Enable/disable HVM guest ACPI, default=1 (enabled) acpi=1 # Enable/disable HVM APIC mode, default=1 (enabled) # Note that this option is ignored if vcpus > 1 apic=1 # List of which CPUS this domain is allowed to use, default Xen picks #cpus = "" # leave to Xen to pick #cpus = "0" # all vcpus run on CPU0 #cpus = "0-3,5,^1" # run on cpus 0,2,3,5 # Optionally define mac and/or bridge for the network interfaces. # Random MACs are assigned if not given. #vif = [ 'type=ioemu, mac=00:16:3e:00:00:88, bridge=xenbr0' ] #---------------------------------------------------------------------------- # Define the disk devices you want the domain to have access to, and # what you want them accessible as. # Each disk entry is of the form phy:UNAME,DEV,MODE # where UNAME is the device, DEV is the device name the domain will see, # and MODE is r for read-only, w for read-write. #disk = [ 'file:/var/img/rhel5-ins.img,hda,w', ',hdc:cdrom,r' ] #disk = [ 'file:/var/img/qcow/rhel4u2_ia32.img.vtd-lm.qcow,hda,w', ',hdc:cdrom,r' ] #---------------------------------------------------------------------------- # Configure the behaviour when a domain exits. There are three 'reasons' # for a domain to stop: poweroff, reboot, and crash. For each of these you # may specify: # # "destroy", meaning that the domain is cleaned up as normal; # "restart", meaning that a new domain is started in place of the old # one; # "preserve", meaning that no clean-up is done until the domain is # manually destroyed (using xm destroy, for example); or # "rename-restart", meaning that the old domain is not cleaned up, but is # renamed and a new domain started in its place. # # The default is # # on_poweroff = 'destroy' # on_reboot = 'restart' # on_crash = 'restart' # # For backwards compatibility we also support the deprecated option restart # # restart = 'onreboot' means on_poweroff = 'destroy' # on_reboot = 'restart' # on_crash = 'destroy' # # restart = 'always' means on_poweroff = 'restart' # on_reboot = 'restart' # on_crash = 'restart' # # restart = 'never' means on_poweroff = 'destroy' # on_reboot = 'destroy' # on_crash = 'destroy' #on_poweroff = 'destroy' #on_reboot = 'restart' #on_crash = 'restart' #============================================================================ # New stuff #device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm' device_model = '/boot/edwin/qemu-dm.debug' #device_model = '/usr/lib/xen/bin/stubdom-dm' #----------------------------------------------------------------------------- # boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d) # default: hard disk, cd-rom, floppy #boot="cda" #----------------------------------------------------------------------------- # write to temporary files instead of disk image files #snapshot=1 #---------------------------------------------------------------------------- # enable SDL library for graphics, default = 0 sdl=0 #---------------------------------------------------------------------------- # enable VNC library for graphics, default = 1 vnc=1 #---------------------------------------------------------------------------- # address that should be listened on for the VNC server if vnc is set. # default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp #vnclisten="localhost" #---------------------------------------------------------------------------- # set VNC display number, default = domid #vncdisplay=1 #---------------------------------------------------------------------------- # try to find an unused port for the VNC server, default = 1 #vncunused=1 #---------------------------------------------------------------------------- # enable spawning vncviewer for domain's console # (only valid when vnc=1), default = 0 #vncconsole=1 #---------------------------------------------------------------------------- # set password for domain's VNC console # default is depents on vncpasswd in xend-config.sxp vncpasswd='' #---------------------------------------------------------------------------- # no graphics, use serial port #nographic=0 #---------------------------------------------------------------------------- # enable stdvga, default = 0 (use cirrus logic device model) stdvga=0 #----------------------------------------------------------------------------- # serial port re-direct to pty deivce, /dev/pts/n # then xm console or minicom can connect serial='pty' #----------------------------------------------------------------------------- # Qemu Monitor, default is disable # Use ctrl-alt-2 to connect monitor=1 #----------------------------------------------------------------------------- # enable sound card support, [sb16|es1370|all|..,..], default none #soundhw='sb16' #----------------------------------------------------------------------------- # set the real time clock to local time [default=0 i.e. set to utc] #localtime=1 #----------------------------------------------------------------------------- # set the real time clock offset in seconds [default=0 i.e. same as dom0] #rtc_timeoffset=3600 #----------------------------------------------------------------------------- # start in full screen #full-screen=1 #----------------------------------------------------------------------------- # Enable USB support (specific devices specified at runtime through the # monitor window) #usb=1 # Enable USB mouse support (only enable one of the following, `mouse' for # PS/2 protocol relative mouse, `tablet' for # absolute mouse) #usbdevice='mouse' #usbdevice='tablet' #----------------------------------------------------------------------------- # Set keyboard layout, default is en-us keyboard. #keymap='ja' --CD/aTaZybdUisKIc Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=stubdom-EdwinHVMDomainVtd2 kernel = "/usr/lib/xen/boot/stubdom.gz" #vif = [ 'ip=10.239.36.188,', 'type=ioemu, mac=00:16:3e:00:00:88, bridge=xenbr0' ] vif = [ 'type=ioemu, mac=00:16:3e:00:00:88, bridge=xenbr0' ] disk = [ 'file:/var/img/rhel5-ins.img,hda,w', ',hdc:cdrom,r' ] #disk = [ 'file:/var/img/qcow/rhel5-ins.img.qcow,hda,w', ',hdc:cdrom,r' ] --CD/aTaZybdUisKIc Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel --CD/aTaZybdUisKIc--