From: Alessandro Zummo Subject: Re: [PATCH] Convert pfc8563 i2c driver from old style to new style Date: Tue, 19 Feb 2008 17:24:50 +0100 Message-ID: <20080219172450.0e4ccc7c@i1501.lan.towertech.it> References: <20080121200901.15517.30253.stgit@terra.home> <20080219161020.61f7ec10@hyperion.delvare> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080219161020.61f7ec10-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jean Delvare Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, Clemens Koller , i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org On Tue, 19 Feb 2008 16:10:20 +0100 Jean Delvare wrote: > Hi Jon, > > On Mon, 21 Jan 2008 15:09:01 -0500, Jon Smirl wrote: > > Convert pfc8563 i2c driver from old style to new style. > > > > Signed-off-by: Jon Smirl > > --- > > > > drivers/rtc/rtc-pcf8563.c | 107 +++++++++++---------------------------------- > > 1 files changed, 27 insertions(+), 80 deletions(-) > > Preliminary note: this driver belongs to the RTC subsystem, so it will > be up to Alessandro Zummo (Cc'd) to push this patch upstream... when it > is ready to go there. A conversion to new style for this driver has already been pushed upstream. Adapting platforms to instantiate the device should be fairly easy, especially when you use the dts. -- Best regards, Alessandro Zummo, Tower Technologies - Torino, Italy http://www.towertech.it _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c