Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m38CDPS6006181 for ; Tue, 8 Apr 2008 08:13:25 -0400 Received: from mail.gmx.net (mail.gmx.net [213.165.64.20]) by mx3.redhat.com (8.13.8/8.13.8) with SMTP id m38CCsnX011464 for ; Tue, 8 Apr 2008 08:12:54 -0400 From: Michael Bergmann To: video4linux-list@redhat.com Date: Tue, 8 Apr 2008 14:12:48 +0200 MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: <200804081412.48030.mbergmann-sh@gmx.de> Subject: Need help installing FastWin tv2000 XP without radio tuner List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hi list! Hope this is the right place to put my question? I placed a LeadTec Winfast TV2000 XP rev. 11 into my dual boot system (AMD Athlon64 X 2 running WinXP and Debian/GNU Linux SID with Kernel 2.6.24-2.6.24.4). While TV is working perfectly for DVB-C under XP (...radio doesn't work - no radio tuner can be found), it refuses to do so under Linux: no signal! What I did already: 1) googeling a lot... 2) hg'ing the v4l sources, compiling and installing them 3) The tv card and remote are detected automatically with their correct names. Nevertheless, I wrote a file /etc/modprobe.d/tvcard, containing the parameters mentioned in the wiki: # Leadtec WinFAST 2000 analog TV options bttv card=34 tuner=5 radio=0 lumafilter=1 combfilter=1 chroma_agc=1 Anyhow, if I start tvtime-scanner --norm=PAL, I receive a message: No Signal! dmesg says: ___________________________________ Linux video capture interface: v2.00 ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:07.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 18 (level, low) -> IRQ 18 bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 18, latency: 64, mmio: 0xcffff000 bttv0: detected: Leadtek TV 2000 XP [card=34], PCI subsystem ID is 107d:6609 bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option] bttv0: gpio: en=00000000, out=00000000 in=003ff500 [init] bttv0: tuner type=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner' 2-0043: chip found @ 0x86 (bt878 #0 [sw]) tda9887 2-0043: creating new instance tda9887 2-0043: tda988[5/6/7] found tuner' 2-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) tuner' 2-0063: chip found @ 0xc6 (bt878 #0 [sw]) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok input: bttv IR (card=34) as /devices/pci0000:00/0000:00:08.0/0000:01:0a.0/input/input5 ___________________________________________________________ root@Asgaard:/home/bergmann# lspci | grep Multimedia 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ____________ lspci -v: 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) Subsystem: LeadTek Research Inc. Unknown device 6609 Flags: bus master, medium devsel, latency 64, IRQ 18 Memory at cffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Kernel driver in use: bttv Kernel modules: bttv 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Subsystem: LeadTek Research Inc. Unknown device 6609 Flags: bus master, medium devsel, latency 64, IRQ 10 Memory at cfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 _______________________________________________________________________ I've tried to change the identifier for the tuner device to everything listed in the wiki, but the result stays the same - no signal. tvtime refuses to connect to the tuner, nor does vdr. I'm stuck. I've heard rumours about an alternative driver under v4l/experimental that might work, but don't have the faintest idea on how to configure it. Could someone please help me out? Thanks a lot for any idea, tip or hint! regards, Michael __________________________ http://www.mbergmann.de -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list