From: Christof Schmitt Subject: [patch 2/3] zfcp: Print some messages only during ERP Date: Thu, 24 Apr 2008 19:35:53 +0200 Message-ID: <20080424174055.560740000@de.ibm.com> References: <20080424173551.821393000@de.ibm.com> Return-path: Content-Disposition: inline; filename=zfcp-stat-message.diff Sender: linux-scsi-owner@vger.kernel.org List-Archive: List-Post: To: James Bottomley Cc: linux-scsi@vger.kernel.org, linux-s390@vger.kernel.org, Swen Schillig , Christof Schmitt List-ID: From: Swen Schillig When statistics are polled from sysfs, the statistics use the same commands as the adapter initialization. Change the messages printed here, so they are only printed during initialization and not for each poll of adapter data. Signed-off-by: Swen Schillig Signed-off-by: Christof Schmitt --- drivers/s390/scsi/zfcp_fsf.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) --- a/drivers/s390/scsi/zfcp_fsf.c 2008-04-24 15:06:34.000000000 +0200 +++ b/drivers/s390/scsi/zfcp_fsf.c 2008-04-24 15:06:38.000000000 +0200 @@ -2036,21 +2036,21 @@ zfcp_fsf_exchange_config_evaluate(struct min(FC_SERIAL_NUMBER_SIZE, 17)); } - ZFCP_LOG_NORMAL("The adapter %s reported the following " - "characteristics:\n" - "WWNN 0x%016Lx, " - "WWPN 0x%016Lx, " - "S_ID 0x%06x,\n" - "adapter version 0x%x, " - "LIC version 0x%x, " - "FC link speed %d Gb/s\n", - zfcp_get_busid_by_adapter(adapter), - (wwn_t) fc_host_node_name(shost), - (wwn_t) fc_host_port_name(shost), - fc_host_port_id(shost), - adapter->hydra_version, - adapter->fsf_lic_version, - fc_host_speed(shost)); + if (fsf_req->erp_action) + ZFCP_LOG_NORMAL("The adapter %s reported the following " + "characteristics:\n" + "WWNN 0x%016Lx, WWPN 0x%016Lx, " + "S_ID 0x%06x,\n" + "adapter version 0x%x, " + "LIC version 0x%x, " + "FC link speed %d Gb/s\n", + zfcp_get_busid_by_adapter(adapter), + (wwn_t) fc_host_node_name(shost), + (wwn_t) fc_host_port_name(shost), + fc_host_port_id(shost), + adapter->hydra_version, + adapter->fsf_lic_version, + fc_host_speed(shost)); if (ZFCP_QTCB_VERSION < bottom->low_qtcb_version) { ZFCP_LOG_NORMAL("error: the adapter %s " "only supports newer control block " @@ -2115,8 +2115,10 @@ zfcp_fsf_exchange_config_data_handler(st zfcp_erp_adapter_shutdown(adapter, 0, 127, fsf_req); return -EIO; case FC_PORTTYPE_NPORT: - ZFCP_LOG_NORMAL("Switched fabric fibrechannel " - "network detected at adapter %s.\n", + if (fsf_req->erp_action) + ZFCP_LOG_NORMAL("Switched fabric fibrechannel " + "network detected at adapter " + "%s.\n", zfcp_get_busid_by_adapter(adapter)); break; default: --