From: Jean Delvare Date: Sat, 26 Apr 2008 13:33:30 +0000 Subject: Re: [lm-sensors] [PATCH] adt7473: Minor documentation update Message-Id: <20080426153330.273df78f@hyperion.delvare> List-Id: References: <20080328210604.GA7183@tree.beaverton.ibm.com> In-Reply-To: <20080328210604.GA7183@tree.beaverton.ibm.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: "Darrick J. Wong" Cc: "Mark M. Hoffman" , linux-kernel , lm-sensors Hi Darrick, Sorry for the late review. On Fri, 28 Mar 2008 14:06:04 -0700, Darrick J. Wong wrote: > Add a sentence about when fan speed increases to maximum. > > Signed-off-by: Darrick J. Wong > --- > > Documentation/hwmon/adt7473 | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 > index 22d8b19..2126de3 100644 > --- a/Documentation/hwmon/adt7473 > +++ b/Documentation/hwmon/adt7473 > @@ -69,7 +69,8 @@ point2: Set the pwm speed at a higher temperature bound. > > The ADT7473 will scale the pwm between the lower and higher pwm speed when > the temperature is between the two temperature boundaries. PWM values range > -from 0 (off) to 255 (full speed). > +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the > +temperature sensor associated with the PWM control exceeds temp#_max. > > Notes > ----- > Obviously correct. Acked-by: Jean Delvare -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors