From: Kim Phillips <kim.phillips@freescale.com>
Date: Mon, 12 May 2008 13:41:52 -0500
Subject: [U-Boot-Users] Using uec.c and uec_phy.c
In-Reply-To: <873832.49987.qm@web52508.mail.re2.yahoo.com>
References: <873832.49987.qm@web52508.mail.re2.yahoo.com>
Message-ID: <20080512134152.443edbd2.kim.phillips@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Sat, 10 May 2008 04:24:08 -0700 (PDT)
klibusel <klibusel@yahoo.com> wrote:

> Hi,
> 
> I am using the polled uboot ethernet driver on
> MPC8360erdk. I have trouble sending and receiving
> ethernet packets. I  have configured the interface as
> a generic MII and it detects the linking coming up.
> However when the QUICC engine reads TXBD and indicates
> TX is complete, nothing comes on the wire. This I
> confirmed using ethereal. Also on the RX side if
> connected to a PC I get RX error. I have made no
> changes to the orginial code. The interface is a
> BCM5481 on the board.
> 
> Any pointer will be appreciated.

you don't mention what version u-boot you're using; can you let us know
if the problem exists on Wolfgang's top of git tree (currently
v1.3.3-rc3-51-g65dcfa7)?

Kim