From: Alexei Babich Date: Sat, 17 May 2008 14:08:06 +0600 Subject: [U-Boot-Users] u-boot dos not autostart commands Message-ID: <200805171408.06423.a.babich@rez.ru> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all. I have PXA270 board with embedded by vendor bootleader - "U-Boot 1.3.0". I define that environment: --- $ printenv baudrate=115200 bootdelay=3 bootargs=video=pxafb:mode:800x480-16,active,pixclock:37000,left:100,right:1,hsynclen:10,upper:20,lower:1,vsynclen:10,outputen:1,pixclockpol:0 root=/dev/sda1 rootdelay=20 console=ttyS0,115200 bootcmd=cp.b 01e00000 a1000000 13216e stdin=serial stdout=serial stderr=serial Environment size: 298/262140 bytes --- But after power on, I cannot see countdown & run bootcmd. If I 'run bootcmd' by hand - that works OK. But not automatically after power on. Can anybody tell me, how I can solve this ? Thank you. -- Regards, Alexei Babich, chematic engineer, OOO NPP "Rezonans", Chelyabinsk, Russia http://www.rez.ru Jabber ID: impatt at jabber.ru