From: Alberto =?iso-8859-1?q?Trevi=F1o?= Subject: Re: Serial console's using kvm -serial ????? Date: Tue, 27 May 2008 09:38:44 -0600 Message-ID: <200805270938.44604.alberto@byu.edu> References: <20080527145044.GA13556@netfirms.com> <20080527145416.GA13609@netfirms.com> <20080527145541.GA13642@netfirms.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Cc: kvm@vger.kernel.org To: Steve Shorter Return-path: Received: from oriskany.byu.edu ([128.187.16.29]:48742 "EHLO nm.byu.edu" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756938AbYE0Piz convert rfc822-to-8bit (ORCPT ); Tue, 27 May 2008 11:38:55 -0400 In-Reply-To: <20080527145541.GA13642@netfirms.com> Content-Disposition: inline Sender: kvm-owner@vger.kernel.org List-ID: On Tuesday 27 May 2008 08:55:41 am Steve Shorter wrote: > I am on Ubuntu Hardy, and tried various things like ptmx, ttyS2 > etc but couldn't get anything to work. If you are referring to using serial devices to connect to the Qemu=20 monitor, I use the telnet option (-monitor telnet::5000,server,nowait).= =20 That option allows me to connect to the Qemu monitor via telnet to that= =20 port. I also specify a different port for each different VM (5001,=20 5002, etc.) and then I can run a very large number of VM's without any=20 device conflicts. =46or my telnet application, I prefer netcat, since it allows me to use= =20 Ctrl-C to exit without having to deal with telnet's escape sequences. My answer may not be even close to what or why you were asking, but I=20 hope that helps. --=20 Alberto Trevi=F1o alberto@byu.edu