Return-path: Received: from kelvin.aketzu.net ([81.22.244.161] ident=postfix) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1KBP33-0006YK-35 for linux-dvb@linuxtv.org; Wed, 25 Jun 2008 09:04:09 +0200 Date: Wed, 25 Jun 2008 10:04:05 +0300 From: Anssi Kolehmainen To: linux-dvb@linuxtv.org Message-ID: <20080625070405.GG19557@aketzu.net> References: <20080623203737.GA19557@aketzu.net> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20080623203737.GA19557@aketzu.net> Subject: Re: [linux-dvb] Terratec Cinergy C PCI (mantis) doesn't work with CAM List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: On Mon, Jun 23, 2008 at 11:37:37PM +0300, Anssi Kolehmainen wrote: > I have Terratec Cinergy PCI DVB-C (1822:4e35) with CI addon card. Card > works fine with latest mantis drivers from http://jusst.de/hg/mantis > (tip, 7348:0b04be0c088a). Problems start when I plug in Conax CAM and > load mantis module. Sometimes it just hangs the computer and when it > works it cannot tune to channels. > > Getting good logs is a bit hard since mantis with verbose=3 hangs > machine when loading module. > > Any ideas how to debug/fix this? Why en50221 (?) breaks i2c for > frontend? After long evening of hacking and testing it seems that reading or writing from the CAM breaks things. mantis_hif_read_mem() (and others) seem to be the problematic functions. If I remove calls to those functions in mantis_ca.c then CAM initialization naturally fails but card continues to work. Does anybody have mantis docs where those hif-functions (or rather the GPIF writes/reads) are described? -- Anssi Kolehmainen anssi.kolehmainen@iki.fi 040-5085390 _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb