From: "Rafael J. Wysocki" Subject: Re: 2.6.25 to 2.6.26-rc8 regression (related to ahci and acpi _GTF) Date: Tue, 1 Jul 2008 16:14:20 +0200 Message-ID: <200807011614.21491.rjw@sisk.pl> References: <4869FB3C.4060509@crans.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from ogre.sisk.pl ([217.79.144.158]:58365 "EHLO ogre.sisk.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758103AbYGAOMl convert rfc822-to-8bit (ORCPT ); Tue, 1 Jul 2008 10:12:41 -0400 In-Reply-To: <4869FB3C.4060509@crans.org> Content-Disposition: inline Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: Mathieu =?iso-8859-15?q?B=E9rard?= , linux-ide@vger.kernel.org, ACPI Devel Maling List , Tejun Heo , Andrew Morton , Andi Kleen , Jeff Garzik [Adding CCs.] On Tuesday, 1 of July 2008, Mathieu B=E9rard wrote: > Hi, > I have a laptop with an ICH6M SATA Controller and a Hitachi hard driv= e. > While it worked well using the ahci module and Linux 2.6.25,=20 > it get randomly 'stuck' for several seconds to several minutes with 2= =2E6.26-rc8. > Successive errors progressively reduce the ATA link speed. >=20 > Passing the libata.noacpi parameter is an effective workaround. >=20 > Please note that it's not the first time i have this kind of issue, s= ee: > http://marc.info/?l=3Dlinux-ide&m=3D117305595312399&w=3D2 > This was found to be a bad interaction between my _GTF taskfile, whic= h enable the > "Enable Device-Initiated Interface Power State Transitions" feature, = and NCQ. > The driver was later NCQ blacklisted to correct the problem. >=20 >=20 > Device detection: >=20 > [ 0.567684] ahci 0000:00:1f.2: version 3.0 > [ 1.568027] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5= Gbps 0x5 impl IDE mode > [ 1.568091] ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part=20 > [ 1.568695] ata1: SATA max UDMA/133 abar m1024@0xb8000c00 port 0xb= 8000d00 irq 19 > [ 1.873016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 1.874045] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded > [ 1.875000] ata1.00: ATA-7: HTS541010G9SA00, MBZOC60D, max UDMA/10= 0 > [ 1.875000] ata1.00: 195371568 sectors, multi 0: LBA48 NCQ (not us= ed) > [ 1.875000] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded > [ 1.875000] ata1.00: configured for UDMA/100 >=20 > Typical error: >=20 > [ 499.178040] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action = 0x6 frozen > [ 499.178105] ata1.00: cmd ca/00:3e:76:45:81/00:00:00:00:00/e1 tag 0= dma 31744 out > [ 499.178106] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask= 0x4 (timeout) > [ 499.178168] ata1.00: status: { DRDY } > [ 499.178220] ata1: hard resetting link > [ 499.942034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 499.943540] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded > [ 499.946056] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded > [ 499.947174] ata1.00: configured for UDMA/100 > [ 499.947174] ata1: EH complete >=20 > Full dmesg is attached. >=20 --=20 "Premature optimization is the root of all evil." - Donald Knuth -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html