From: Mark Brown Subject: Re: WM9712 Not Giving output Date: Mon, 4 Aug 2008 13:12:21 +0100 Message-ID: <20080804121221.GC2499@sirena.org.uk> References: <20080801183711.GG11735@sirena.org.uk> <619046.61482.qm@web50105.mail.re2.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from cassiel.sirena.org.uk (cassiel.sirena.org.uk [80.68.93.111]) by alsa0.perex.cz (Postfix) with ESMTP id B8F1D24516 for ; Mon, 4 Aug 2008 14:12:26 +0200 (CEST) Content-Disposition: inline In-Reply-To: <619046.61482.qm@web50105.mail.re2.yahoo.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Nitin Mahajan Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On Sat, Aug 02, 2008 at 02:46:17AM -0700, Nitin Mahajan wrote: > I checked the mixer configuration.The registers 0x18h and 0x04h were mute at the time of initiating DMA for playback. > I did set both registers with 0x7fff. From mixer point of view, If I am using an headphone, are these registers enough? I am still not able to hear anything. Please provide alsactl output as requested - any configuration should be done via the ALSA mixer rather than register writes. In the case of register 0x18 setting 0x7fff will set a gain of -34.5dB on each channel which may be too low, depending on your input.