From: Mark Brown Subject: Re: WM8750 utilization Date: Fri, 15 Aug 2008 17:58:15 +0100 Message-ID: <20080815165814.GI23120@sirena.org.uk> References: <200808151832.37747.harryrat@postnuklear.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from cassiel.sirena.org.uk (unknown [80.68.93.111]) by alsa0.perex.cz (Postfix) with ESMTP id 432521038C9 for ; Fri, 15 Aug 2008 18:58:26 +0200 (CEST) Content-Disposition: inline In-Reply-To: <200808151832.37747.harryrat@postnuklear.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Harald Radke Cc: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On Fri, Aug 15, 2008 at 06:32:37PM +0200, Harald Radke wrote: > The Loox720 has a headphone jack, a earpiece and a speaker. Please post your machine driver. If you are doing code modifications to make any of the changes you discuss below please also show these changes. > When driving LOUT1/ROUT1, sound goes via headphones, LOUT2/ROUT2 drives the > earpiece. When setting OUT3 on ROUT1, the speaker plays fine. Could you please also clarify how the hardware is connected up here? Which outputs on the device are connected to each of the headphone, speaker and earpiece? > - Trying to utilize headphone switch via the WM8750 registers doesn't really > work ): depending on the polarity bit either one of the OUTs is either not > muted at all or activated at all. Are you sure that HPDETECT is wired up correctly and that the expected level change occurs on it when the jack is inserted and removed?