Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx2.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m85AddD1023337 for ; Fri, 5 Sep 2008 06:39:40 -0400 Received: from metis.extern.pengutronix.de (metis.extern.pengutronix.de [83.236.181.26]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m85AdIQC014119 for ; Fri, 5 Sep 2008 06:39:25 -0400 Date: Fri, 5 Sep 2008 12:39:17 +0200 From: Sascha Hauer To: video4linux-list@redhat.com Message-ID: <20080905103917.GQ4941@pengutronix.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Cc: Guennadi Liakhovetski Subject: [soc-camera] about the y_skip_top parameter List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hi all, The y_skip_top parameter tells the cameras to effectively make the picture one line higher. I think this parameter was introduced to work around a bug in the pxa camera interface. The pxa refuses to read the first line of a picture. The problem with this parameter is that it is set to 1 in the sensor drivers and not in the pxa driver, so it's the sensor drivers which work around a bug in the pxa. On other hardware platforms (mx27 in this particular case) I cannot skip the first line, so I think this parameter should be set to 1 in the pxa driver and not the sensor drivers. What do you think? Sascha -- Pengutronix - Linux Solutions for Science and Industry Handelsregister: Amtsgericht Hildesheim, HRA 2686 Hannoversche Str. 2, 31134 Hildesheim, Germany Phone: +49-5121-206917-0 | Fax: +49-5121-206917-9 -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list