From: Wolfgang Denk Date: Tue, 09 Sep 2008 12:08:22 +0200 Subject: [U-Boot] [PATCH] Remove gap fill in srec object v2 In-Reply-To: <1220821827-6250-1-git-send-email-ricardo.ribalda@uam.es> References: <1220821827-6250-1-git-send-email-ricardo.ribalda@uam.es> Message-ID: <20080909100822.305762489D@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Ricardo Ribalda Delgado, In message <1220821827-6250-1-git-send-email-ricardo.ribalda@uam.es> you wrote: > SREC files do not need gap fill: The load address is specified in the file. > On the other hand, it can't be avoided in a .bin object. It has no > information about memory location. > > diff in v2: > -Change comment (wd) > > Signed-off-by: Ricardo Ribalda Delgado > --- > Makefile | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) Applied, thanks. Note: the comment ("diff in v2: ...") should have been put *below* the '---' line. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Logic and practical information do not seem to apply here." "You admit that?" "To deny the facts would be illogical, Doctor" -- Spock and McCoy, "A Piece of the Action", stardate unknown