Date: Thu, 18 Sep 2008 15:59:45 -0400 From: Richard Michael Subject: Re: [linux-lvm] How to start duplicate VG with new name and UUID? Message-ID: <20080918195945.GA17231@nexus.edgeofthenet.org> References: <20080917194243.GA11502@nexus.edgeofthenet.org> <48D21DB9.6040804@redhat.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline In-Reply-To: <48D21DB9.6040804@redhat.com> Reply-To: LVM general discussion and development List-Id: LVM general discussion and development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , List-Id: Content-Type: text/plain; charset="us-ascii" To: bmr@redhat.com, LVM general discussion and development On Thu, Sep 18, 2008 at 10:22:01AM +0100, Bryn M. Reeves wrote: > Richard Michael wrote: > > Hello list, > > > > I'm using FC7 2.6.23.12-52.fc7 and LVM2 lvm2-2.02.24-1.fc7. > > > > I have a RAID1 mdadm software array containing a VG. Half the array has > > been removed from the system and now returned and I want data from the > > old half, before it is resync'd back into the array. > > See: > > http://www.redhat.com/archives/linux-lvm/2007-November/msg00039.html > > And the reply from Alasdair which improves a couple of the steps. Thanks Bryn. I actually did quite a bit of searching before posting, and found your message you reference, but it wasn't applicable as your first step was to deactivate the VG (and I can't deactive the existing VG with mounted LVs). But, I should have looked at Alasdair's reply, which solves that problem. Sorry for the noise, and thanks for pointing me to his reply, I'll give it a go. Regards, Richard