From: David Brownell Subject: [patch 2.6.27-rc6-omap] hsmmc: request_irq says which controller is involved Date: Sun, 21 Sep 2008 14:16:14 -0700 Message-ID: <200809211416.14496.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from smtp124.sbc.mail.sp1.yahoo.com ([69.147.64.97]:41246 "HELO smtp124.sbc.mail.sp1.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1752822AbYIUVUU (ORCPT ); Sun, 21 Sep 2008 17:20:20 -0400 Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: linux-omap@vger.kernel.org Make the hsmmc driver irq requests say which controller they're associated with (e.g. "mmc0") so /proc/interrupts is more useful. Signed-off-by: David Brownell --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -908,8 +908,8 @@ static int __init omap_mmc_probe(struct platform_device *pdev) OMAP_HSMMC_READ(host->base, HCTL) | SDBP); /* Request IRQ for MMC operations */ - ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, pdev->name, - host); + ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, + mmc_hostname(mmc), host); if (ret) { dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); goto err_irq; @@ -918,8 +918,8 @@ static int __init omap_mmc_probe(struct platform_device *pdev) /* Request IRQ for card detect */ if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) { ret = request_irq(mmc_slot(host).card_detect_irq, - omap_mmc_cd_handler, IRQF_DISABLED, "MMC CD", - host); + omap_mmc_cd_handler, IRQF_DISABLED, + mmc_hostname(mmc), host); if (ret) { dev_dbg(mmc_dev(host->mmc), "Unable to grab MMC CD IRQ\n");