From: Wolfgang Denk Date: Fri, 24 Oct 2008 08:23:12 +0200 Subject: [U-Boot] [U-boot] Export functions using Jumptable in Standalone application In-Reply-To: <20144414.post@talk.nabble.com> References: <20144414.post@talk.nabble.com> Message-ID: <20081024062312.B2DED810F65C@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear "Nagesh.ML", In message <20144414.post@talk.nabble.com> you wrote: > > In one of my standalone application used for initializing the > hardware(Ethernet Switch) registers, I have exported two functions > miiphy_read() and miiphy_write() of u-boot as per the procedure given in > README.standalone document. By doing so, will my standalone application come > under GPL? If yes, is there any other way to implement this? Is this initialization necessary for the network operation in U-Boot? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If you believe that feeling bad or worrying long enough will change a past or future event, then you are residing on another planet with a different reality system.