From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 31 Oct 2008 09:23:13 +0100
Subject: [U-Boot] [PATCH] Olimex SAM9-L9260 board support
In-Reply-To: <20081031070538.GD23324@game.jcrosoft.org>
References: <48EA52DA.2000309@gmail.com>
	<20081031070538.GD23324@game.jcrosoft.org>
Message-ID: <20081031082313.GE23324@game.jcrosoft.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 08:05 Fri 31 Oct     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 21:03 Mon 06 Oct     , Cristian Birsan wrote:
> > Added support for the Olimex SAM9-L9260 development board.
> > This patch is based on u-boot v1.3.4.
> > 
> > Tested with data flash only (not with NAND).
> > 
> > Signed-off-by: Cristian Birsan <cristian.birsan@gmail.com>
> > ---
> >   MAKEALL                            |    1 +
> >   Makefile                           |   21 ++--
> >   board/olimex/sam9l9260/Makefile    |   59 ++++++++
> >   board/olimex/sam9l9260/config.mk   |    1 +
> >   board/olimex/sam9l9260/led.c       |   64 +++++++++
> >   board/olimex/sam9l9260/nand.c      |   78 +++++++++++
> >   board/olimex/sam9l9260/partition.c |   39 ++++++
> >   board/olimex/sam9l9260/sam9l9260.c |  264 ++++++++++++++++++++++++++++++++++++
> >   drivers/mtd/nand/nand_ids.c        |    2 +
> >   include/configs/sam9l9260.h        |  212 +++++++++++++++++++++++++++++
> >   10 files changed, 732 insertions(+), 9 deletions(-)
> >   create mode 100644 board/olimex/sam9l9260/Makefile
> >   create mode 100644 board/olimex/sam9l9260/config.mk
> >   create mode 100644 board/olimex/sam9l9260/led.c
> >   create mode 100644 board/olimex/sam9l9260/nand.c
> >   create mode 100644 board/olimex/sam9l9260/partition.c
> >   create mode 100644 board/olimex/sam9l9260/sam9l9260.c
> >   create mode 100644 include/configs/sam9l9260.h
> > 
I've forget one think please add an entry to the MAINTAINER file

Best Regards,
J.