From: David Brownell Subject: [patch 2.6.28-rc3-git] twl4030-core: allow reading entire register banks Date: Fri, 7 Nov 2008 14:00:03 -0800 Message-ID: <200811071400.04181.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from smtp115.sbc.mail.sp1.yahoo.com ([69.147.64.88]:23949 "HELO smtp115.sbc.mail.sp1.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751522AbYKGWPM (ORCPT ); Fri, 7 Nov 2008 17:15:12 -0500 Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Samuel Ortiz Cc: lkml , linux-omap@vger.kernel.org From: David Brownell Minor change to the TWL4030 utility interface: support reads of all 256 bytes in each register bank (vs just 255). This can help when debugging, but is otherwise a NOP. Signed-off-by: David Brownell --- drivers/mfd/twl4030-core.c | 4 ++-- include/linux/i2c/twl4030.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -233,7 +233,7 @@ extern void twl4030_power_init(struct tw * * Returns the result of operation - 0 is success */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes) +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; int sid; @@ -282,7 +282,7 @@ EXPORT_SYMBOL(twl4030_i2c_write); * * Returns result of operation - num_bytes is success else failure. */ -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes) +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; u8 val; --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -78,8 +78,8 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *v * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 * for the value, and populate your data starting at offset 1. */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /*----------------------------------------------------------------------*/