From: Daniel Phillips Subject: Developing Tux3 with UML Date: Sat, 29 Nov 2008 20:48:32 -0800 Message-ID: <200811292048.33651.phillips@phunq.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org To: tux3@tux3.org Return-path: Received: from phunq.net ([64.81.85.152]:59339 "EHLO moonbase.phunq.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752848AbYK3Esh (ORCPT ); Sat, 29 Nov 2008 23:48:37 -0500 Content-Disposition: inline Sender: linux-fsdevel-owner@vger.kernel.org List-ID: Hi, Running the Tux3 kernel code under UML is easy, fast and safe. Here is a recipe where you can be up and running in about ten minutes from a standing start: # get a kernel tree wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.26.5.tar.bz2 tar -xjf linux-2.6.26.5.tar.bz2 cd linux-2.6.26.5 # get the latest tux3 patch and patch the kernel wget http://tux3.org/patches/tux3-2.6.26.5 patch You can also run uml using real partitions for root and test: ./linux ubda=/dev/sdaX ubdb=/dev/sdaX The only thing that needs to be special about the root filesystem is, /etc/inittab has to refer to the uml ttys. See umlroot/etc/inittab. Regards, Daniel