From: Sean MacLennan Date: Wed, 3 Dec 2008 01:38:18 -0500 Subject: [U-Boot] NAND only (no NOR) In-Reply-To: <200812030648.57618.sr@denx.de> References: <4934F7FC.2030105@aimvalley.nl> <20081202215033.501f3403@lappy.seanm.ca> <200812030648.57618.sr@denx.de> Message-ID: <20081203013818.016619b6@lappy.seanm.ca> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, 3 Dec 2008 06:48:57 +0100 "Stefan Roese" wrote: > Currently you need to define the page-size of the NAND used for > booting (512 bytes vs. 2k). The 2k 4xx NAND booting support is was > done about 1/2 a year ago. So perhaps you tested this when this 2k > support was not available yet. We are running 1.3.0, so you are probably right. It may no longer be a problem. > Yes, I would recommend to do it this way if possible. A small NOR for > U-Boot and environment and everything else in NAND. This makes things > much easier. But I understand that this is sometimes a problem with > space (2 FLASH chips) and costs. Mainly cost. We didn't want to pay for a second chip. Cheers, Sean