Return-Path: Received: from VA3EHSOBE005.bigfish.com (outbound-va3.frontbridge.com [216.32.180.16]) by ozlabs.org (Postfix) with ESMTP id 9B259DDED9 for ; Wed, 10 Dec 2008 10:09:15 +1100 (EST) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Subject: RE: XUPV2P update to kernel 2.6 fails Date: Tue, 9 Dec 2008 16:09:07 -0700 In-Reply-To: <493ADC3B.2040505@ee.ethz.ch> References: <493ADC3B.2040505@ee.ethz.ch> From: John Linn To: , "linuxppc-embedded" Message-ID: <20081209230909.832FA928076@mail163-va3.bigfish.com> List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , You should visit http://xilinx.wikidot.com as there's more information ther= e. In general, this board is not directly supported, but is very similar to ML= 405, a board with a Virtex 4 and a 405 processor. Thanks, John > -----Original Message----- > From: linuxppc-embedded-bounces+john.linn=3Dxilinx.com@ozlabs.org [mailto= :linuxppc-embedded- > bounces+john.linn=3Dxilinx.com@ozlabs.org] On Behalf Of Jan M=FCller > Sent: Saturday, December 06, 2008 1:11 PM > To: linuxppc-embedded > Subject: XUPV2P update to kernel 2.6 fails > = > Hi all, > = > I was wondering if anyone got the XUPV2P board successfully up and > running with a recent 2.6 kernel? > = > I didn't succeed. I tried the newest kernel from xilinx git (2.6.27) and > also an older one, 2.6.22 (also from xilinx git). For the newer I used > the "device-tree" as bsp. For the 2.6.22 I just copied over the > xparameters_ml300.h file. > = > In both cases no output at all was observable at the uart. Not even a > single sign from the uart at any time... > = > Strange is, the same download.bit file is working with a 2.4 kernel. > Could it be a kernel .config issue? > = > But can this really be a software/kernel issue? For the 2.4 kernel there > was an output from the "bootloader" (some addresses and the > "Loading..." information) even for wrong configured kernels... > = > On this list I was reading something about setting the uart clockfreq > correctly in the .dts (it was not set at all, I have to stick with EDK > 9.1). But this didn't help for me. > > To boot the FPGA I have to use an ace file on a cf-disc. For this I use > the download.bit file together with the simpleImage.virtex405-XUPV2P.elf > (on 2.6.27) or zImage (on 2.6.22)... > = > Any suggestions on this? Thanks a lot! > = > Regards, > Jan > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded This email and any attachments are intended for the sole use of the named r= ecipient(s) and contain(s) confidential information that may be proprietary= , privileged or copyrighted under applicable law. If you are not the intend= ed recipient, do not read, copy, or forward this email message or any attac= hments. Delete this email message and any attachments immediately.