From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 17 Dec 2008 15:35:34 +0100 Subject: [U-Boot] [PATCH] ARM: add IDE init to lib_arm/board.c Part 1/1 In-Reply-To: <4948FA61.8000604@gandalf.sssup.it> References: <49384718.RDeSlY+9Cb0AIN+u%stefan.althoefer@web.de> <493846e5.IKdOHwF2kDjrnHN0%stefan.althoefer@web.de> <20081216215809.GJ24266@game.jcrosoft.org> <4948F480.6040000@gandalf.sssup.it> <4948FA61.8000604@gandalf.sssup.it> Message-ID: <20081217143534.GI26222@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 14:10 Wed 17 Dec , michael wrote: > michael wrote: > > Stefan Althoefer wrote: > > > >> Jean-Christophe PLAGNIOL-VILLARD schrieb: > >> > >> > >> > >>>> diff -uprN u-boot-orig//lib_arm/board.c u-boot/lib_arm/board.c > >>>> --- u-boot-orig//lib_arm/board.c 2008-12-02 17:25:32.000000000 +0100 > >>>> +++ u-boot/lib_arm/board.c 2008-12-02 23:29:36.000000000 +0100 > >>>> @@ -441,6 +441,11 @@ extern void davinci_eth_set_mac_addr (co > >>>> } > >>>> #endif > >>>> > >>>> +#if defined(CONFIG_CMD_IDE) > >>>> + puts("IDE: "); > >>>> + ide_init(); > >>>> +#endif /* CONFIG_CMD_IDE */ > >>>> > >>>> > >>> are you sure it will work? > >>> > >>> Best Regards, > >>> J. > >>> > >>> > >> On my board (Janz emPC-A400 with IXP425) it does. With some more > >> patches to add IDE to this board. > >> > >> What is your doubt? > >> > >> If you see problems, drop this. I can also add IDE to board_late_init(). > >> > >> > > I don't sure if the outsw/insw are implemented in arm. > > > > Regards Michael > > _______________________________________________ > > U-Boot mailing list > > U-Boot at lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot > > > > > Well, I'm not sure :( if the outsw/insw are implemented in arm. IIRC they are not. I'll check but in u-boot we do not have the asm implementtion. Best Regards, J.