From: Arnd Bergmann Subject: Re: [PATCH RFC v5] net: add PCINet driver Date: Thu, 15 Jan 2009 13:58:33 +0100 Message-ID: <200901151358.34250.arnd@arndb.de> References: <20090107195052.GA24981@ovro.caltech.edu> <200901131842.54688.arnd@arndb.de> <20090115001251.GA10745@ovro.caltech.edu> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Cc: Rusty Russell , David Miller , linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org, shemminger@vyatta.com, netdev@vger.kernel.org To: Ira Snyder Return-path: Received: from moutng.kundenserver.de ([212.227.126.171]:56479 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754124AbZAOM6o (ORCPT ); Thu, 15 Jan 2009 07:58:44 -0500 In-Reply-To: <20090115001251.GA10745@ovro.caltech.edu> Content-Disposition: inline Sender: netdev-owner@vger.kernel.org List-ID: On Thursday 15 January 2009, Ira Snyder wrote: > The only problem with that is that you cannot route interrupts from the > DMA controller over PCI with the PowerPC core running. Which makes it > mostly useless for this case. If the host supports MSI, you can simply program the DMA controller to write the correct message to the inbound address of the MSI interrupt controller! All modern host systems should have MSI, as this is required by the PCIe specification, but it still somewhat limits the choice of your hosts. Arnd <><