From: Luigi 'Comio' Mantellini Date: Mon, 26 Jan 2009 15:31:42 +0100 Subject: [U-Boot] qemu-mips usage In-Reply-To: <20090126125307.GA15602@game.jcrosoft.org> References: <200901261014.00547.luigi.mantellini.ml@gmail.com> <20090126125307.GA15602@game.jcrosoft.org> Message-ID: <200901261531.43976.luigi.mantellini.ml@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear All, thanks for the help. I used the last svn copy and it works fine: URL: svn://svn.savannah.nongnu.org/qemu/trunk Repository Root: svn://svn.savannah.nongnu.org/qemu Repository UUID: c046a42c-6fe2-441c-8c8c-71466251a162 Revision: 6436 Anyway I created a trivial patch in order to permit to have an arbitrary flash size on mips board (I'm need to simulate a board with 32MB instead the usual 4M). Using the patch, the flash memory placed at the end of 0xbfxxxxxxxx memory space: 4MB flash: start bfc00000 -> end bfffffff 8MB flash: start bf800000 -> end bfffffff 16MB flash: start bf000000 -> end bfffffff 32MB flash: start be000000 -> end bfffffff The firmware must be placed always at address 0xbfc00000. these are the relative address on the file: 4MB flash: firmware offset +0 8MB flash: firmware offset +4MB 16MB flash: firmware offset +12MB 32MB flash: firmware offset +28MB To create the image files, use the following trivial script: dd if=/dev/zero of=flash.img bs=$flashsize count=1 conv=sync dd if=u-boot.bi of=flash.img bs=1 seek=$biosbase conv=notrunc Thanks again for your support. luigi On Monday 26 January 2009 13:53:07 Jean-Christophe PLAGNIOL-VILLARD wrote: > On 10:13 Mon 26 Jan , Luigi 'Comio' Mantellini wrote: > > Hi ML, > > > > I'm evaluating the qemu-mips to simulate a mips 4kec/24kec board. I'm > > working on the high level booting sequence (linux init scripts), and > > qemu+uboot should be a good choice to emulate a basic system (flash + > > dram + 4kec cpu). > > > > Furthermore, also following the doc/README.qemu_mips, I'm not able to see > > the u-boot prompt on my qemu because the flash is not recognized. I > > haven't experience with qemu-mips and I don't understand where the flash > > is placed (canonical 0xbfxxxx address?) and how it is managed. Reading > > the configs/qemu_mips.h, It seems that the flash is managed as a common > > CFI flash placed to 0xbfc00000 address... but u-boot shows always > > "Unknown FLASH on Bank 1" on startup. > > > > Has anyone tried to use qemu-mips to boot a standard u-boot image > > (qemu_mips target on u-boot)? > > > > > > Thanks for any suggestion. > > > > luigi > > > > ########### Useful Infos ############ > > > > This is the qemu banner (on Ubuntu 8.10): > > > > EMU PC emulator version 0.9.1, Copyright (c) 2003-2008 Fabrice Bellard > > Please use the SVN version of qemu for the current u-boot version > > I'll update the README.qemu_mips to specify the last u-boot version for the > old qemu > > Best Regards, > J. -- Luigi Mantellini R&D - Software Industrie Dial Face S.p.A. Via Canzo, 4 20068 Peschiera Borromeo (MI), Italy Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 Email: luigi.mantellini at idf-hit.com -------------- next part -------------- A non-text attachment was scrubbed... Name: mips_r4k_aribtrary_flash_size.patch Type: text/x-patch Size: 1318 bytes Desc: not available Url : http://lists.denx.de/pipermail/u-boot/attachments/20090126/1fe90f8f/attachment.bin