From: Wolfgang Denk Date: Fri, 06 Feb 2009 13:45:10 +0100 Subject: [U-Boot] [PATCH] i.MX31: fir imx31_phycore to work after Linux reboot In-Reply-To: References: Message-ID: <20090206124510.4D9D58322908@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Guennadi Liakhovetski, In message you wrote: > Upon power on i.MX31 enables most peripheral clocks, Linux disables the ones Why does U-Boot do that? This is against U-Boot design guidelines which state that U-Boot shall only activate such peripherals that it uses itself. > didn't use I2C, the clock would stay disabled. And U-Boot on imx31_phycore > uses an I2C EEPROM for environment data. So, after a reboot U-Boot would be That's another area of bad design. Should we not change U-Boot such that it places the environment in flash? BTW: What does "fir imx31_phycore to work after Linux reboot" mean? I cannot parse that. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Children are natural mimics who act like their parents despite every effort to teach them good manners.