From: David Brownell Subject: Re: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch support Date: Sun, 8 Feb 2009 12:25:14 -0800 Message-ID: <200902081225.14286.david-b@pacbell.net> References: <200902041523.07767.david-b@pacbell.net> <19F8576C6E063C45BE387C64729E739403FA81AD36@dbde02.ent.ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from smtp116.sbc.mail.sp1.yahoo.com ([69.147.64.89]:39165 "HELO smtp116.sbc.mail.sp1.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1752264AbZBHUZQ (ORCPT ); Sun, 8 Feb 2009 15:25:16 -0500 In-Reply-To: <19F8576C6E063C45BE387C64729E739403FA81AD36@dbde02.ent.ti.com> Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: "Pillai, Manikandan" Cc: OMAP On Wednesday 04 February 2009, Pillai, Manikandan wrote: > I tested the patch on the OMAP 3 EVM. I still find that the > hotplug feature does not work on the OMAP3 EVM. The issue is > that if I read the gpio_cd, I am getting the correct value > on the gpio pin(INSERT =3D 0, PLUGOUT =3D 1) but the interrupts > are not generated. =20 >=20 > The mmc0 interrupts always shows 0. Are you getting any other IRQs through the twl4030 code? There's not a lot of debugging I can do with this, since I don't have an EVM ... and since this seems to work OK on other boards. (Testing on SDP being easiest, since it's got a slot not tied down with MMC root.) This patch was basically sent as a seed, since nobody else seemed to be filling in the missing MMC/SD pieces on that board. - Dave > root@172.24.190.49:~# cat /proc/interrupts=20 > =A0 =A0 =A0 =A0 =A0 =A0CPU0 > =A011: =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A0INTC =A0prcm > =A012: =A0 =A0 =A0 =A0 =A04 =A0 =A0 =A0 =A0INTC =A0DMA > =A025: =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A0INTC =A0dispc > =A037: =A0 =A0 =A0 1724 =A0 =A0 =A0 =A0INTC =A0gp timer > =A056: =A0 =A0 =A0 =A0267 =A0 =A0 =A0 =A0INTC =A0i2c_omap > =A057: =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A0INTC =A0i2c_omap > =A061: =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A0INTC =A0i2c_omap > =A072: =A0 =A0 =A0 =A0178 =A0 =A0 =A0 =A0INTC =A0serial idle, serial > =A073: =A0 =A0 =A0 =A0 =A01 =A0 =A0 =A0 =A0INTC =A0serial idle > =A074: =A0 =A0 =A0 =A0 =A01 =A0 =A0 =A0 =A0INTC =A0serial idle > =A083: =A0 =A0 =A0 =A0 43 =A0 =A0 =A0 =A0INTC =A0mmc0 > =A092: =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A0INTC =A0musb_hdrc > =A093: =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A0INTC =A0musb_hdrc > 335: =A0 =A0 =A0 =A0 =A00 =A0 =A0 =A0 =A0GPIO =A0ads7846 > 336: =A0 =A0 =A0 3565 =A0 =A0 =A0 =A0GPIO =A0eth0 > 369: =A0 =A0 =A0 =A0 =A00 =A0 =A0 twl4030 =A0twl4030_keypad > 378: =A0 =A0 =A0 =A0 =A00 =A0 =A0 twl4030 =A0twl4030_usb > 384: =A0 =A0 =A0 =A0 =A00 =A0 =A0 twl4030 =A0mmc0 > Err: =A0 =A0 =A0 =A0 =A00 >=20 > Regards > Mani >=20 > > -----Original Message----- > > From: linux-omap-owner@vger.kernel.org [mailto:linux-omap- > > owner@vger.kernel.org] On Behalf Of David Brownell > > Sent: Thursday, February 05, 2009 4:53 AM > > To: OMAP > > Subject: [patch/rft 2.6.29-rc3-omap-git] omap3 evm: MMC switch supp= ort > >=20 > > Update OMAP3 EVM board support to support the MMC/SD switches, > > when used with the twl4030 based power card. > >=20 > > Also, less usefully, LEDB as a GPIO LED ... it's on the underside > > of the board, so it's probably not very useful to most folk. =A0The > > LCD backlight is controlled by LEDA though; more useful, though > > its PWM mode might not be practical on this board (I don't know > > how that inductor will affect things). > >=20 > > This is done from schematics, so it needs testing (and maybe some > > bugfixes) from folk with an EVM board. > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html