From: Wolfgang Denk Date: Mon, 09 Feb 2009 21:13:45 +0100 Subject: [U-Boot] [PATCH 2/3] Add support W90P710 EMC interface In-Reply-To: <49900F21.3020507@svitonline.com> References: <49900F21.3020507@svitonline.com> Message-ID: <20090209201345.74E5E8322908@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Vovk Konstantin, In message <49900F21.3020507@svitonline.com> you wrote: > This will add Ethernet interfacse to uBoot > W90P710 ARM SoC port. If you want reset > and initialize PHY KSZ8001 after MAC init, > simply add CONFIG_RESET_PHY_R define in your > board configuration file. In most cases this is > not necessarily. > --- > drivers/net/Makefile | 5 +- > drivers/net/w90p710_eth.c | 482 +++++++++++++++++++++++++++++++++++++++++++++ > drivers/net/w90p710_eth.h | 277 ++++++++++++++++++++++++++ > include/netdev.h | 3 +- > 4 files changed, 763 insertions(+), 4 deletions(-) > create mode 100644 drivers/net/w90p710_eth.c > create mode 100644 drivers/net/w90p710_eth.h Signed-off-by: line missing. Sorry, but we will have to reject all patches without SoB... Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de ...the increased productivity fostered by a friendly environment and quality tools is essential to meet ever increasing demands for software. - M. D. McIlroy, E. N. Pinson and B. A. Tague