From: David Miller Date: Wed, 11 Feb 2009 01:32:52 +0000 Subject: Re: [PATCH] fix Quattro HME irq registration on proble failures Message-Id: <20090210.173252.247636723.davem@davemloft.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org From: Meelis Roos Date: Sun, 8 Feb 2009 01:12:28 +0200 (EET) > Currently, the sunhme driver installs SBus Quattro interrupt handler > when at least one HME card was initialized correctly and at least one > Quattro card is present. This breaks when a Quattro card fails > initialization for whatever reason - IRQ is registered and OOPS happens > when it fires. > > The solution, as suggested by David Miller, was to keep track which > cards of the Quattro bundles have been initialized, and request/free the > Quattro IRQ only when all four devices have been successfully > initialized. > > The patch only touches SBus initialization - PCI init already resets the > card pointer to NULL on init failure. > > The patch has been tested on Sun E3500 with SBus and PCI single HME > cards and one PCI Quattro HME card in a situation where any PCI card > failed init when the SBus routines tried to init them by mistake. > > Additionally it replaces Quattro request_irq panic with error return - > if this card fails to work, at least let the others work. This change is > untested. > > Signed-off-by: Meelis Roos This patch looks great, I made some minor coding style fixups and updated to commit log message to indicate that you did test this change also on an E450 system. Now, to answer your questions: > * should we really panic if request_irq fails in > quattro_sbus_register_irqs()? Better propagate the error up. However, do > we still need to return success if any IRQ was registered correctly > (like the logic of of_register_driver one step before)? Yes, propagating the error is much better. The panic() is overboard. > * happy_meal_open() does request_irq for PCI cards and non-quattro SBus > cards, so the printk on failure may lie about SBus? Or did I misread the > code? It's half lying :-) In some of the cases this request_irq() would be for SBUS (non-quattro only) and for others it would be for PCI (quattro or not).