From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 14 Feb 2009 09:28:30 +0100 Subject: [U-Boot] [PATCH v2] i.MX31: Start the I2C clock on driver initialisation In-Reply-To: References: Message-ID: <20090214082830.GB13612@game.jcrosoft.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 09:23 Fri 13 Feb , Guennadi Liakhovetski wrote: > i.MX31 powers on with most clocks running, so, after a power on this explicit > clock start up is not required. However, as Linux boots it disables most clocks > to save power. This includes the I2C clock. If we then soft reboot from Linux > the I2C clock stays off. This breaks the phycore, which has its environment in > I2C EEPROM. Fix the problem by explicitly starting the clock in I2C driver > initialisation routine. > > Signed-off-by: Guennadi Liakhovetski > --- Ack-by: Jean-Christophe PLAGNIOL-VILLARD Best Regards, J.