Return-Path: Received: from smtp.drzeus.cx (82-117-125-11.tcdsl.calypso.net [82.117.125.11]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id A16ECDDEE9 for ; Sun, 22 Feb 2009 02:58:08 +1100 (EST) Date: Sat, 21 Feb 2009 16:57:57 +0100 From: Pierre Ossman To: avorontsov@ru.mvista.com Subject: Re: [PATCH 02/11] sdhci: Add support for bus-specific IO memory accessors Message-ID: <20090221165757.22747648@mjolnir.ossman.eu> In-Reply-To: <20090213144039.GA19572@oksana.dev.rtsoft.ru> References: <20090206180520.GA16123@oksana.dev.rtsoft.ru> <20090206180645.GB11548@oksana.dev.rtsoft.ru> <20090208215020.46ca5724@mjolnir.drzeus.cx> <20090213144039.GA19572@oksana.dev.rtsoft.ru> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=PGP-SHA1; protocol="application/pgp-signature"; boundary="=_freyr.drzeus.cx-15097-1235231881-0001-2" Cc: Ben Dooks , Arnd Bergmann , Liu Dave , linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org, sdhci-devel@list.drzeus.cx List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , This is a MIME-formatted message. If you see this text it means that your E-mail software does not support MIME-formatted messages. --=_freyr.drzeus.cx-15097-1235231881-0001-2 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable On Fri, 13 Feb 2009 17:40:39 +0300 Anton Vorontsov wrote: >=20 > No, on eSDHC the registers are big-endian, 32-bit width, with, for > example, two 16-bit "logical" registers packed into it. >=20 > That is, >=20 > 0x4 0x5 0x6 0x7 > |~~~~~~~~:~~~~~~~~| > | BLKCNT : BLKSZ | > |________:________| > 31 0 >=20 > ( The register looks wrong, right? BLKSZ should be at 0x4. But imagine > that you swapped bytes in this 32 bit register... then the registers > and their byte addresses will look normal. ) >=20 > So if we try to issue readw(SDHCI_BLOCK_SIZE), i.e. readw(0x4): >=20 > - We'll read BLKCNT, while we wanted BLKSZ. This is because the > address bits should be translated before we try word or byte > reads/writes. > - On powerpc read{l,w}() convert the read value from little-endian > to big-endian byte order, which is wrong for our case (the > register is big-endian already). >=20 > That means that we have to convert address, but we don't want to > convert the result of read/write ops. >=20 *cries* Now this is just incredibly horrible. Why the hell did they try to use the sdhci interface and then do stupid things like this? > > > +static inline void sdhci_writel(struct sdhci_host *host, u32 val, in= t reg) > > > +{ > > > + host->writel(host, val, reg); > > > +} > >=20 > > Having to override these are worst case scenario >=20 > Hm. It's not a worst case scenario, it's a normal scenario for > eSDHC. Why should we treat eSDHC as a second-class citizen? >=20 Because it's complete and utter crap. Freescale has completely ignored the basic register interface requirements of the SDHCI spec. Treating eSDHC as a second-class citizen is generous IMO. > > as far as I'm > > concerned, so I'd prefer something like: > >=20 > > if (!host->ops->writel) > > writel(host->ioaddr + reg, val); > > else > > host->ops->writel(host, val, reg); >=20 > Surely the overhead isn't measurable... but why we purposely make > things worse? >=20 We can most likely do some micro-optimisation do make the compare part cheaper, but the point was to avoid a function call for all the properly implemented controllers out there. We could have a flag so that it only has to check host->flags, which will most likely be in the cache anyway. Overhead for eSDHC is not a concern in my book, what is interesting is how much this change slows things down for other controllers. Rgds --=20 -- Pierre Ossman WARNING: This correspondence is being monitored by the Swedish government. Make sure your server uses encryption for SMTP traffic and consider using PGP for end-to-end encryption. --=_freyr.drzeus.cx-15097-1235231881-0001-2 Content-Type: application/pgp-signature; name="signature.asc" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.10 (GNU/Linux) iEYEARECAAYFAkmgJIgACgkQ7b8eESbyJLgKBACggVet9H6aVhm8mkuYX6pn7irj axoAoO68JlKdSD1UavnXbJk5Utf4Wv8X =Sft+ -----END PGP SIGNATURE----- --=_freyr.drzeus.cx-15097-1235231881-0001-2--