From: Wolfgang Denk Date: Mon, 23 Feb 2009 10:34:03 +0100 Subject: [U-Boot] saveenv command erases flash u-boot In-Reply-To: <22156928.post@talk.nabble.com> References: <22156928.post@talk.nabble.com> Message-ID: <20090223093403.23B70832E43F@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear rudresh, In message <22156928.post@talk.nabble.com> you wrote: > > i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR > Flash , u-boot stored in NOR flash. when i do the saveenv , reset command > the u-boot is erased. i'm not able to fix this issue. help me to fix this > issue 1.3.0 is extremely old. Please use current code instead (v2009.03-rc1). Chances are good that the problem has long been fixed. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What is wanted is not the will to believe, but the will to find out, which is the exact opposite. -- Bertrand Russell, "Skeptical Essays", 1928