From: Wolfgang Denk Date: Mon, 23 Feb 2009 10:35:13 +0100 Subject: [U-Boot] U-Boot Digest, Vol 9, Issue 275 In-Reply-To: <1235312940.26727.2.camel@quercus-bis> References: <1235312940.26727.2.camel@quercus-bis> Message-ID: <20090223093513.E5069832E43F@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Peter Griffin, In message <1235312940.26727.2.camel@quercus-bis> you wrote: > > > > i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND , NOR > > Flash , u-boot stored in NOR flash. when i do the saveenv , reset command > > the u-boot is erased. i'm not able to fix this issue. help me to fix this > > issue > > > On my board this was due to CONFIG_SYS_MONITOR_LEN not being big enough. when replying, please: * Keep the original poster's subject * Make sure to includ etheread information In general, you probably want to read http://www.netmeister.org/news/learn2quote.html Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Copy from one, it's plagiarism; copy from two, it's research.