From: Kim Phillips Date: Mon, 23 Feb 2009 16:35:45 -0600 Subject: [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support In-Reply-To: <499D87A5.4030407@denx.de> References: <499D87A5.4030407@denx.de> Message-ID: <20090223163545.2a21d4df.kim.phillips@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Thu, 19 Feb 2009 17:24:05 +0100 Heiko Schocher wrote: > This patch adds I2C support for the Keymile kmeter1 board. > It uses the First I2C Controller from the CPU, for > accessing 4 temperature sensors, an eeprom with IVM data > and the booteeprom over a pca9547 mux. > > Signed-off-by: Heiko Schocher > --- > I let the dtt_bus env variable in this patch, and remove this, > when I send a patch for moving dtt_init after relocation is > done. Then this is no longer needed. These things usually work the other way around; please fix this so dtt_bus isn't needed. Kim