From: Mark Brown Subject: Re: [patch/rfc 2.6.29-rc6 1/2] regulator: enumerate voltages Date: Thu, 26 Feb 2009 10:46:27 +0000 Message-ID: <20090226104624.GA4229@sirena.org.uk> References: <200902081037.06645.david-b@pacbell.net> <200902241617.22643.david-b@pacbell.net> <20090225151721.GA31637@sirena.org.uk> <200902251702.03230.david-b@pacbell.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from cassiel.sirena.org.uk ([80.68.93.111]:1106 "EHLO cassiel.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753462AbZBZKqa (ORCPT ); Thu, 26 Feb 2009 05:46:30 -0500 Content-Disposition: inline In-Reply-To: <200902251702.03230.david-b@pacbell.net> Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: David Brownell Cc: Liam Girdwood , lkml , OMAP On Wed, Feb 25, 2009 at 05:02:03PM -0800, David Brownell wrote: > Oh, one more comment. Requiring manual configuration > of fixed-voltage regulators is pure time-wastage. Unless, of course, you happen to be using one of those consumers that wants to know the voltage it's running at to configure itself. Examples I've seen include sensors and analogue components which can be configured for better performance if they know the voltage they run at - and yes, people do run these things off regulators that they vary at runtime. If you want to submit a patch making it optional that's fine.