From: David Brownell Subject: Re: omap35x mmc support Date: Tue, 3 Mar 2009 15:59:26 -0800 Message-ID: <200903031559.26946.david-b@pacbell.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from n6b.bullet.sp1.yahoo.com ([69.147.64.163]:21832 "HELO n6b.bullet.sp1.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753729AbZCDAAJ (ORCPT ); Tue, 3 Mar 2009 19:00:09 -0500 In-Reply-To: Content-Disposition: inline Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: twebb Cc: "linux-omap@vger.kernel.org Mailing List" On Tuesday 03 March 2009, twebb wrote: > Does the omap kernel support SD/MMC cards on all of the three > interfaces on OMAP35xx: SD/MMC1, SD/MMC2, and SD/MMC3? I've seen it work for MMC1 and MMC2, and recent patches should have improved the MMC3 support. Note that MMC3 only supports 1.8V; and MMC2 needs some kind of level shifting solution to use other voltages, such as a transceiver. (Or a dual-voltage managed NAND device.)