Return-path: Received: from n25.bullet.mail.ukl.yahoo.com ([87.248.110.142]:33918 "HELO n25.bullet.mail.ukl.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1751158AbZCLJaz (ORCPT ); Thu, 12 Mar 2009 05:30:55 -0400 From: bloehei To: Antti Palosaari Subject: Re: EC168 support?! Date: Thu, 12 Mar 2009 10:31:30 +0100 References: <200903111217.17846.bloehei@yahoo.de> <200903111424.02606.bloehei@yahoo.de> <49B7C5A9.1050906@iki.fi> In-Reply-To: <49B7C5A9.1050906@iki.fi> Cc: linux-media@vger.kernel.org, linux-dvb@linuxtv.org MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200903121031.31869.bloehei@yahoo.de> Sender: linux-media-owner@vger.kernel.org List-ID: > bloehei wrote: > >> 40 00 00 00 40 08 c5 03 >>> 12 0c 93 80 06 12 0d 43 74 83 f0 e5 48 30 e3 > >> 78 > > hmm, at least that last fw upload packet is wrong. It should look like > 40 00 00 00 00 18 c5 03 >>> 49 9f f5 > > I did yesterday many changes and fixed one bad bug that could be behind > that. Please test with latest tree at: > http://linuxtv.org/hg/~anttip/ec168/ > > regards > Antti Hi, GREAT! The firmware now gets uploaded and I can watch all channels in my region with the linux vdr. Thanks a lot! Here's my system log: > ec168_module_init: > usbcore: registered new interface driver dvb_usb_ec168 > usb 1-3: new high speed USB device using ehci_hcd and address 2 > usb 1-3: configuration #1 chosen from 1 choice > ec168_probe: interface:0 > ec168_identify_state: > c0 01 00 00 01 00 01 00 <<< 00 > ec168_identify_state: reply:00 > dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference design' in cold state, > will try to load a firmware usb 1-3: firmware: requesting dvb-usb-ec168.fw > dvb-usb: downloading firmware from file 'dvb-usb-ec168.fw' > ec168_download_firmware: > 40 00 00 00 00 00 00 08 >>> 02 13 e4 02 0e d3 00 00 00 00 00 02 14 f7 00 00 > 00 00 00 <---cut---> > 40 00 00 00 00 08 00 08 >>> 4a 12 0c 5b 04 f0 02 08 4b 12 09 7f 12 0d 43 74 > 82 f0 12 <---cut---> > 40 00 00 00 00 10 00 08 >>> 9d ec 98 40 05 fc ee 9d fe 0f d5 f0 e9 e4 ce fd > 22 ed f8 <---cut---> > 40 00 00 00 00 18 c5 03 >>> 49 9f f5 49 e5 48 94 00 f5 48 80 b3 e4 f5 24 f5 > 25 22 af <---cut---> > 40 01 00 00 01 00 00 00 >>> > 40 04 01 00 08 00 00 00 >>> > ec168_rw_udev: usb_control_msg failed :-110 > 40 04 00 00 06 02 00 00 >>> > dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference design' in warm state. > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. DVB: registering new adapter (E3C EC168 DVB-T USB2.0 reference > design) ec168_ec100_frontend_attach: > DVB: registering adapter 0 frontend 0 (E3C EC100 DVB-T)... > ec168_mxl5003s_tuner_attach: > MXL5005S: Attached at address 0xc6 > dvb-usb: E3C EC168 DVB-T USB2.0 reference design successfully initialized > and connected. ec168_probe: interface:1 > ec168_identify_state: > c0 01 00 00 01 00 01 00 <<< 01 > ec168_identify_state: reply:01 > dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference design' in warm state. > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. DVB: registering new adapter (E3C EC168 DVB-T USB2.0 reference > design) ec168_ec100_frontend_attach: > DVB: registering adapter 1 frontend 0 (E3C EC100 DVB-T)... > ec168_mxl5003s_tuner_attach: > MXL5005S: Attached at address 0xc6 > dvb-usb: E3C EC168 DVB-T USB2.0 reference design successfully initialized > and connected. USB-Id: 18b4:1689 Card name: Sinovideo SV DVB-T 3420B If I can help with testing, just let me know. Regards, Jo