From: Wolfgang Denk Date: Thu, 12 Mar 2009 19:42:46 +0100 Subject: [U-Boot] Problem booting Linux In-Reply-To: <49B9224C.6090302@duran-audio.com> References: <49B9224C.6090302@duran-audio.com> Message-ID: <20090312184246.397B2832E8B8@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Remco Poelstra, In message <49B9224C.6090302@duran-audio.com> you wrote: > > linux.bin uImage', I get the following output (mind the absent -C flag): > ----------- > Image Name: Linux Kernel Image > Created: Thu Mar 12 15:37:01 2009 > Image Type: ARM Linux Kernel Image (gzip compressed) > Data Size: 1986268 Bytes = 1939.71 kB = 1.89 MB > Load Address: 0x00000000 ----------------^^^^^^^^^^ > Entry Point: 0x00000000 ----------------^^^^^^^^^^ Are you sure these are correct? 0x0000 is usually a ROM address on ARM; I don't think you can load and run your kernel image there. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The flow chart is a most thoroughly oversold piece of program docu- mentation. -- Frederick Brooks, "The Mythical Man Month"