From: David Miller Subject: Re: [PATCH] tulip: Fix for MTU problems with 802.1q tagged frames Date: Fri, 13 Mar 2009 15:43:49 -0700 (PDT) Message-ID: <20090313.154349.203057278.davem@davemloft.net> References: <1236248494-1599-1-git-send-email-ivecera@redhat.com> <20090306181322.GA3616@colo.lackof.org> Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: ivecera@redhat.com, netdev@vger.kernel.org, kyle@mcmartin.ca, szpajder@staszic.waw.pl To: grundler@parisc-linux.org Return-path: Received: from 74-93-104-97-Washington.hfc.comcastbusiness.net ([74.93.104.97]:55017 "EHLO sunset.davemloft.net" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1751588AbZCMWoD (ORCPT ); Fri, 13 Mar 2009 18:44:03 -0400 In-Reply-To: <20090306181322.GA3616@colo.lackof.org> Sender: netdev-owner@vger.kernel.org List-ID: From: Grant Grundler Date: Fri, 6 Mar 2009 11:13:22 -0700 > On Thu, Mar 05, 2009 at 11:21:34AM +0100, Ivan Vecera wrote: > > The original patch was submitted last year but wasn't discussed or applied > > because of missing maintainer's CCs. I only fixed some formatting errors, > > but as I saw tulip is very badly formatted and needs further work. > > > > Original description: > > This patch fixes MTU problem, which occurs when using 802.1q VLANs. We > > should allow receiving frames of up to 1518 bytes in length, instead of > > 1514. > > > > Based on patch written by Ben McKeegan for 2.4.x kernels. It is archived > > at http://www.candelatech.com/~greear/vlan/howto.html#tulip > > I've adjusted a few things to make it apply on 2.6.x kernels. > > > > Tested on D-Link DFE-570TX quad-fastethernet card. > > > > Signed-off-by: Tomasz Lemiech > > Signed-off-by: Ivan Vecera > > Acked-by: Grant Grundler Applied to net-next-2.6, thanks everyone.